10 Specifications, etc.
Mounting the X-9 in a rack
When mounting the X-9 in a 19” rack, use only the supplied rack-mount ears and mounting screws, etc.
As shown here, remove the five screws (1) on the left side of the unit.
Locate and fit the left rack-mount angle (with the fan cutout) and fasten it to the X-9 using the five screws removed in the previous step.
Fit the right rack-mount angle in the same way.
Case mounting
WARNING
It is most important that if you are mounting the X-9 in a rack or in a case, that the supplied fan cover and ven- tilation cover are fitted as explained here. This ensures a smooth airflow, and prevents the fan and ventilation vents from being blocked, which could cause overheat- ing and damage to the X-9.
Remove the two screws (1) on the left side of the X-9 as shown here.
Use the four screws supplied with the fan cover to attach the fan cover.
Repeat the process for the ventilation cover on the right side of the X-9.
TASCAM X-9Owner’s Manual 33
