GE X-9 owner manual Cross-fader and fader controls, Effect, menu, etc. management

2 Getting acquainted with the X-9

Cross-fader and fader controls

These take care of the A and B outputs which are assigned to the cross-fader using the ASSIGN con- trols, and then passed to the master stereo output.

It is possible to set the cross-fader curve, reversal, and allow source starting with the cross-fader.

See “Cross-fading” on page 14 for details of how the cross-fader fits into the signal chain.

See “Faders” on page 21 for details of cross-fader settings.

Effect, menu, etc. management

This section handles the effects, the parameter menus and the equalization memories of the X-9.

See “EQ” on page 28, “Effects” on page 23 and “Menu reference” on page 17 for details.

TASCAM X-9Owner’s Manual 9