7 Effects

Recalling stored effect settings

There are two procedures, depending on whether the EFFECT key is lit or not.

If the EFFECT key is lit…

1 Press and hold the

FUNCTION key for

MEMO

about two seconds. The

 

display shows MEMO

 

(MEMO).

 

2 Turn the DATA knob coun- terclockwise so that the effect RECALL indicator is flashing.

3 Press the ENTER key. The RECALL indicator now lights steadily.

4Turn the DATA knob to choose between the numbers of the slots which have been filled (the numbers of empty slots are not shown) and dFLt (dFLt—default).

5 Press the ENTER key to recall the settings. The effect is activated, and after one second, the X-9 returns to the “recalled” status in step 3.

Alternatively:

If the EFFECT key is not lit…

1Press and hold the

FUNCTION key for

MEMO

about two seconds.

 

The RECALL indica-

 

tor lights.

 

2 Turn the DATA knob to choose between the numbers of the slots which have been filled (the numbers of empty slots are not shown) and dFLt (dFLt—default).

3 Press the ENTER key to recall the settings. The effect is activated (but cannot be heard until the EFFECT

key is lit), and after one second, the X-9 returns to the “recall ready” status in step 2.

In both cases:

Exit the store/recall mode by pressing the FUNCTION key for about 2 seconds or press- ing the EFFECT key or changing the effect type with the effect selection control.

TIP

You can clear all stored effect settings using the menu system (25Ec). See “Clear all effect memories” on page 20 for details.

TASCAM X-9Owner’s Manual 25

Page 25
Image 25
GE X-9 owner manual Recalling stored effect settings