Goldstar R-E21M owner manual Recording While YOU are Away, Qqq

RECORDING WHILE YOU ARE AWAY

Be sure that the clock is set to the correct time. (Refer to "CLOCK SEI-IING" on page 21 .)

1.insert the cassette.

NOTE: Before starting check that the erase prevention tab is not missing. If it is removed, recording will not start.

2.Set the program timer for the; Menu program Number Program Mode

Input Select Channel

Tape Speed Record-starting time Record-stopping time

Date (on which to recording is to be made)

(Refer to "PROGRAM TIMER SETTING" on pages 24 through 28.)

"INPUT SELECT" Button

_Y

UENU _ D_tAy

(_ (_ (_

:QQQ:

Number Buttons

®®,

L ....

000

REMOTE COWmOL

3.Press "POWER" ON/OFF button to OFF. The TIMER indicator will appear on the VCR display.

NOTES:

1.If the erase prevention tab is removed, the cas-

sette is ejected automatically and the "TAPE-IN"indicator will flash. Stick a piece of cel- lophane tape over the erase prevention hole on the cassette to enable recording.

2.The "TAPE-IN"indicator will flash if a cassette is not inserted.

"TIMER" Indicator

"POWER" ON/OFF Button

4.The recording will start and the " TIMER " and the

"REC" indicators will light at the time you have programmed.

NOTES:

1.When the TIMER indicator is on, your VCR can not be operated manually (except POWER but- ton).

2.If the tape runs out (if the end of the tape is reached) during timer recording, the mode will change automatically to STOP, REWIND and EJECT in this order. At that point, power will cease to be supplied to prevent the recorded tape from being overlapped.

3.If the "TIMER" indicator goes off it indicates that there has been a power interruption and the "[]me and Programming need to be reset.

4.To stop the VCR during "l]mer Recording, press "POWER" ON/OFF button OFF.

- 23 -