Set the hour by pressing two number buttons on
the remote control and two more for the minute
(for example, 0 2 15 for 2:15). The display
prompts you to select AM or PM. CLOCK SET
TIME 02:15,_-!-_-
AP."I/I
TO END PUSH MENU
O Press "1" for AM or "2" for PM (for example, 2 for
PM).
The display flashes and prompts you to set the
date.
CLOCK SET
TIME 02:15 PM
MONTI-_A)f/YEAR
DATE _;4 --I.::
TO END PUSH MENU
OSet the date by pressing six digits in order of
month, day and year (for example 09 01 93 for
September 1, 1993). The day of the week will
appear when you have entered all six digits for
the date.
NOTE: Always press "0" before single-digit
months and days.
• The VCR will not accept illogical time or date
entries (13th month for example).
• Now the display on the screen will show the
correct time.
CLOCK SET
TIME 02:15 PM
MONTH/DAY/YEA R
DATE 09/01/93
WED
TO END PUSH MENU
Press "MENU" button. The display resumes the
"original menu". PUSH SELECTION NUMBER
1 CLOCK SET
2 NORMAL PROGRAM
3 DAILY PROGRAM
4 WEEKLY PROGRAM
5 PROGRAM REVIEW
6 SET UP
TO END PUSH MENU
_) Press "MENU" button once again to return to the TV screen.
To display the date and time, press the DISPLAY button.
CLOCK SETTING NOTES:
1.The clock must be set to the correct time before programming the timer for unattended recording.
2. When moving the VCR, if the power cord is reconnected within a few seconds (about 3 seconds), there is no
need to reset the clock.
3. If a power failure lasts more than afew seconds, or ifthe power cord is disconnected for longer than afew
seconds, the clock needs to be reset.
-22 -