RECORDING ONE PROGRAM
1.Insert the cassette (one with erase prevention tab intact) into cassette loading door.
2.Press "TAPE SPEED" button to select the desired speed.
3.Press "INPUT SELECT" button so as to select Channel Number Display.
4.Press Channel Select Button ( • or • ) to select channel to be recorded and set the television to
Channel 3 or 4 depending on which channel is selected on the RF CHANNEL Select Switch on
the rear of the VCR.
5.Check to make sure that the reception is accept- able.
"INPUT SELECT" Button
•CHANNEL" Select Buttons
WHILE VIEWING ANOTHER
8.If you want to periodically check what you are recording, simply set the channel selector on the television to the VCR channel (3 or 4) and press "VCR/TV" selector to turn "VCR" indicator on.
"VCR" Indlcetor
"VCR/TV" Selector
• RE_ITR" Button
®®®
®®®
"PAUSE/
STILL"
Button
i®®®i
,,® ® (_:
000
"TAPE SPEED" Button
vies
OOO
EDITING A RECORDING
6.Press the REC/ITR button once.
You are now recording the program you see on the iV screen.
7.To continue to record this program while you watch something else, simply press "VCR/TV" selector to turn "VCR" indication off. Set the
channel selector on the television to the program you want to watch.
1.Press "PLAY" button and watch the program until the exact point is reached where you want the new recording to start.
2.Press "PAUSE/STILL" button.
3.Press the REC/ITR button once on the VCR or on
the remote control. The program material to be recorded will appear on the television.
4.When you wish to start recording, press "PAUSE/STILL" button again. The new program material will directly follow the previously recorded material. This feature is especially helpful during camera use so each segment of the recording becomes a continuous program.
- 30 -
