OPress two digits for the channel to be recorded (for example, "0" "4" for channel 4). The display will prompt you to select a recording speed.

_) Press a digit from "1" to "3" on the remote control to select the recording speed you want program ("1" for SP, "2" for LP, "3" for EP mode).

(for example, "1" for SP). The display will then prompt you to enter the recording start time.

(])Press five digits, two for the hour and two more for the minute and one more for AM or PM (for example, "0" "6" "0.... 0" "2" for 6:00 PM). Press

"1" for AM or "2" for PM. The display will prompt you to select the stop time.

NOTE: Always press "0" before a single digit hour and minute.

_Press five digits, two for the hour and two more for the minute and one more for AM or PM (for example, "0" "7" "3" "0" "2" for 7:30 PM).

NOTE: The present month, day and year for the DATE (for example, 090193 for September 1, to change it at step 13).

NORMAL PROGRAM

PROGRAM 1 X t /

,o4 ,.

S_ .--_-1 LP-J-;_ EP _,-J_--_

/1\ /'IN/I

TO END PUSH MENU

NORMALPROGRAM

PROGRAM1

CH 04 SPE_D SP

STARTTIME3_<: ....

TO END PUSH MENU

NORMALPROGRAM

PROGRAM 1

CH 04 SPEED SP START TIME 06:00 PM

STOP TIME- ,-'":'I_

TO END PUSH MENU

NORMALPROGRAM

PROGRAM 1

CH 04 SPEED SP START TIME 06:00 PM

STOP TIME 0.,_:,30 PM START DATE -09/01/93

/I ',WED

TO END PUSH MENU

- 26 -

Page 27
Image 27
Goldstar R-E21M owner manual Normal Program, Program 1 X t