INSTANT TIMER RECORDING (ITR)

Instant Timer Recording allows you to make simplified timer recording without using the program timer.

FOR ITR RECORDING

1.Be sure that the clock is set to the correct time. (Refer to "CLOCK SETI'ING".)

2.Insert the cassette (one with the erase prevention tab intact) into the cassette loading door.

3.Press "INPUT SELECT" button so as to select Channel Number Display.

4.Press "CHANNEL" Select Buttons to select the channel to be recorded.

5.Press "TAPE SPEED" button to select the desired speed.

STARTING ITR NOW

To start recording immediately and to set the recording length (in 30-minute increments).

1.First perform Steps 1 through 5 of "FOR ITR RECORDING".

2.After recording has started, press REC/ITR

button once again to indicate the recording time on the screen.

INSTANT TIMER RECORD

p,.AY

"REC/ITR* Button

O®®

®®®

o,®®

RECALLING THE ITR SE'n'ING

Press the REC/ITR button, and the recalled ITR setting will be displayed on the screen. The recalled ITR setting will automatically return to the current position in 5 seconds.

NOTE: To recall the recording time, press the REC/ITR button only once. If you press this button twice or more, the recording time will be changed.

CH O2

TAPE SPEED: SP

START

01:09PM

LENGTH

0:00

,Ira

 

For each press, the time changes as in the chart below.

EXAMPLE: CURRENT TIME 01:09 PM

REC/ITR Button

LENGTH display

 

 

(ITR STOP TIME)

1 press

0:00

2

presses

0:30

3

presses

1:00

17 presses

8:00

18 presses

8:30

19

presses

9:00

20

presses

0:00

TO CANCEL THE ITR SETTING

1.Press the "POWER" ON/OFF button or STOP button to stop the VCR during ITR operation.

NOTES:

The "TIMER" and "REC" indicators will light on the VCR display during Instant Timer Recording.

eThe recording time can be extended any time during "ITR" by pressing "REC/ITR" button.

Press "REC/ITR" button to reset the length of recording in 30 minute increments for up to 9 hours and then to "END" (the recording will continue until the end of the tape).

To change the "ITR" program, the previous infor- mation must be cleared first.

If "ITR" and the program timer recording overlap, the former will override the latter.

During Instant Timer Recording, you can not change the Channel of the VCR.

If you want to view another channel, press the VCR/TV button to TV mode, and then select the channel to be viewed with the TV's channel selector.

- 29 -

Page 30
Image 30
Goldstar R-E21M owner manual Instant Timer Recording ITR, For ITR Recording, Starting ITR NOW, To Cancel the ITR Setting