3.Press "1" button to select "TV" or "CATV". If your VCR is connected to a home antenna system, select "TV", select "CATV" when your VCR is connected to a cable antenna. Switching is performed between "TV" and "CATV" on the TV screen every time "1" button is pressed.
PUSH SELECTION NUMBER
1 | TV SYSTEM | (CATV) |
2 | AUTO CHANNEL SET | |
3 | LANGUAGE | SELECT |
TO END PUSH MENU
4.Press "2" button for channel setting. The tuner will automatically cycle through all available channels in the area and place them in the tuner's memory. After
AUTO CHANNEL SET
PROCEEDING
TO END PUSH MENU
5.Press the MENU button to return to the TV screen.
NOTE: To check the presetting, first set the TV to the VCR channel and press "CHANNEL" select button (UP or DOWN) to cycle to VCR tuner through all the channels you have stored in memory.
TO ADD OR ERASE CHANNELS FROM
CHANNEL MEMORY
This feature allows you to manually add or remove channels from the channel scan. To do so, please refer to the procedure below:
TO ERASE A CHANNEL(S)
1.Turn the TV and tune to channel 3 or 4.
2.Press the POWER ON/OFF button to turn the VCR on. The "VCR" indicator will light on the dis- play panel of the VCR.
3.Press "CHANNEL" select button ( • or • ) for an unwanted channel.
4.Press the ADD/ERASE button for eliminating the channel, and the channel display flashes on the TV screen.
5.Repeat steps 3 and 4 until all unwanted channels have been eliminated.
NOTE: This VCR is equipped with AFT (Automatic
Fine Tuning). But it does not have an ON/OFF switch.
TO ADD A CHANNEL(S)
. Press channel select buttons to select the desired channel (by using the "0" through "9" and "100" button).
. Press "ADD/ERASE" button to store the channel, and the channel display flashing will stop.
. Repeat steps 6 and 7 for other desired channels in your area.
Now both standard TV channels and CATV channels has been preset.
