SECTION 6: OPERATIONS
Operation Safety |
| Conveyor Controls |
|
|
|
|
|
|
All operators of this machine must be familiar with the Section 2: Safety before operating this machine. However, no safety list can cover every hazard for every working environment, so common sense must be used at all times in all situations.
Damage to your eyes, lungs, and ears could result from failure to wear safety glasses, a dust mask, and hearing protection while using this machine.
Loose hair and cloth- ing could get caught in machinery and cause serious personal inju- ry. Keep loose clothing rolled up and long hair tied up and away from moving machinery.
NOTICE
The following section was designed to give instructions on the basic operations of this machine. However, it is in no way compre- hensive of all of the machine’s applica- tions. WE STRONGLY RECOMMEND that you read books, trade magazines, or get formal training to maximize the potential of your machine.
The Model G0504 features an infeed conveyor and a return conveyor. The speed and engage- ment controls of the conveyors are controlled by the conveyor control lever. The farther the control lever is pushed forward, the faster the conveyors will move.
To operate the infeed conveyor:
1.Read the subsection titled “Control Panel” on Page 14 to become familiar with the con- trol panel functions.
2.With the saw running, push the infeed con- veyor engagement lever (Figure 22) foward to engage the conveyor belts. Push the lever farther foward to make the conveyors run faster, or pull the lever backwards to make the conveyors run slower. Pull the lever all the way back to stop the conveyors.
Conveyor Control Lever
