Grizzly G0504 owner manual Set Up, About this Section, Piece Inventory, Unpacking

SECTION 5: SET UP

About this Section

The purpose of this section is to guide you through the required steps to get your machine out of its crate and into operating condition.

This machine presents serious injury hazards to untrained users. Read through this entire man- ual to become familiar with the controls and operations before start- ing the machine!

Wear safety glasses during the entire set up process!

Piece Inventory

After all the parts have been removed from the shipping crate, you should have:

•Resaw Bandsaw Machine

•Bandsaw Blade 180" x 1" x 0.035"

•Tool Box

•T-Handle Wrench 19mm

•7 pc. Combination Wrench Set —10, 12, 13, 14, 17, 19, 21 mm

•7 pc. Hex Wrench Set —2.5, 3, 4, 5, 6, 8, 10 mm

•Phillips Head Screwdriver

•Flat Head Screwdriver

•Adjustment Wrench 30 x 32 mm

In the event that any non-proprietary parts are missing (e.g. nuts or washers), we would be glad to replace them, or for the sake of expediency, replacements can be obtained at your local hard- ware store.

Unpacking

The Model G0504 is shipped from the manu- facturer in a carefully built crate. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the con- dition of your shipment, you should inventory the equipment from the shipping crate.

Figure 10. Piece inventory from packing crate.

G0504 16" Horizontal Resaw Bandsaw -15-