![](/images/new-backgrounds/1146741/14674123x1.webp)
SECTION 5: SET-UP
Unpacking
This combination lathe/mill is shipped from the manufacturer in a carefully packed crate. If you discover the machine is damaged after you’ve signed for delivery, and the truck and driver are gone, you will need to file a freight claim with the carrier. Save the containers and all packing mate- rials for possible inspection by the carrier or its agent. Without the packing materials, filing a freight claim can be difficult. If you need assis- tance determining whether you need to file a freight claim, or with the procedure to file one, please contact our Customer Service.
The Model G0516 is a heavy machine, 420 lbs. shipping weight. DO NOT move the machine by yourself – you will need assistance and
power equipment. Serious personal injury may occur if safe moving methods are not fol- lowed.
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.
Piece Inventory
Inside the crate you will find:
•Model G0516 Base Unit
•Mill/Drill Attachment
•Backsplash
•6mm Allen® Wrench
•5mm Allen® Wrench
•4mm Allen® Wrench
•3mm Allen® Wrench
•75T Gear
•72T Gear
•70T Gears (2)
•68T Gear
•66T Gear
•60T Gear
•50T Gear
•48T Gear
•45T Gear
•40T Gear
•
•Lathe Chuck Key
•5.5/7mm Combo Wrench
•8/10mm Combo Wrench
•12/14mm Combo Wrench
•17/19mm Combo Wrench
•36mm Wrench
•Drill Chuck Key
•3 Outside Jaws
•Dead Center MT#2
•Dead Center MT#3
•Spanner Wrench
•19mm
•Square Head Wrench
•Oil Can
•Taper Shank MT#3 & Drill Chuck
•
•Mill/Drill Table
•Cap Screws
•Mill/Drill Fuse 110V/5A
•Lathe Fuse 110V/25A
•Carriage Handle & Screw
•Apron Handle & Screw
•Faceplate
•
•Fixing Pin
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| G0516 Lathe/Mill | |
|
|
|
|
| ||
|
|
|
|
|