![](/images/new-backgrounds/1146741/14674115x1.webp)
Grounding
In the event of an electrical short, grounding reduces the risk of electric shock by providing a path of least resistance to disperse electric cur- rent. This tool is equipped with a power cord hav- ing an
1.The outlet must be properly installed and grounded in accordance with all local codes and ordinances.
Verify that any existing electrical outlet and cir- cuit you use is actually grounded. If not, it will be necessary to run a sepa- rate 12 A.W.G. copper grounding wire from the outlet to a known ground. If not grounded properly, serious personal injury could occur.
Figure 1. Typical 110V plug and outlet.
This machine must have a ground prong in the plug to help ensure that it is grounded. DO NOT remove ground prong from plug to fit into a
G0516 Lathe/Mill |