Attach Mill/Drill to
Lathe
To attach the mill/drill unit to the lathe body:
1.Get the help of an assistant.
2.Locate the included nut that fits on the large bolt in the mounting bracket, so you have it ready for the next step.
3.Place the bottom end of the mill/drill unit over the mounting bolt and up against the mount- ing bracket, then have your assistant thread the nut onto the bolt as shown in Figure 5 — but DO NOT tighten the nut yet.
Figure 5. Threading nut onto bolt with mill/drill
unit in place against mounting bracket.
4.Align the indicator on the mounting bracket with the “0” line on the mill/drill swivel scale, as shown in Figure 6.
Figure 6. Mill/drill swivel scale aligned with hub
indicator line in the “0” position.
5.Now, tighten the large nut that attaches the mill/drill unit to the lathe hub bracket.
G0516 Lathe/Mill |
