Changing
Tool Posts
The Model G0516 comes with a turret tool post. Grizzly also offers quick change tool post as an optional accessory to the Model G0516. Both tool posts can be removed and replaced in the same manner.
To change a tool post from the compound rest:
1.Rotate the tool post lock handle counter- clockwise to remove it as in Figure 20.
Figure 20. Removing tool post lock handle.
2.Pull the installed tool post straight up to remove it from the compound slide, as shown in Figure 21.
Figure 21. Removing tool post.
3.Replace the new tool post on the compound slide.
4.Position the tool post to its intended working angle.
5.Replace the tool post lock handle and tighten it to keep the tool post secured in place. Figure 22 shows the quick change tool post installed.
Figure 22. Optional quick change tool post
installed.
|
|
|
|
|
|
|
|
|
| G0516 Lathe/Mill | |
|
|
