![](/images/new-backgrounds/1146741/14674165x1.webp)
3.Thread the extra
5.Loosen the cap screw on the gear bracket, and pivot the bracket so the top gear mesh- es with the
Figure 46. Extra fixed-shaft gear mounted in
position “A.”
4.When the machine is shipped, a fixed-shaft gear is in position “C.” Remove that fixed- shaft gear from mounting location “C” and thread it into mounting location “B” as shown in Figure 47.
Figure 47. Fixed-shaft gear mounted in
position “B.”
Figure 48. All gears in mesh for reverse
threading operations.
6.Tighten the cap screw in the gear bracket to keep it from pivoting.
7.Spin the lathe chuck by hand to ensure that the gears do not bind.
8.Replace the cover and test run the machine before proceeding with your specific opera- tion.
G0516 Lathe/Mill |