![](/images/new-backgrounds/1146741/14674133x1.webp)
Install Backsplash
To install the backsplash:
1.Get the help of an assistant.
2.Hold the backsplash against the back of the lathe so all of the mounting holes are aligned, and instruct your assistant to secure the back splash with the (2)
Figure 8.
Figure 7. Two cap screws secure the left-hand
side of the back splash to the lathe.
Figure 8. Two hex bolts/washers secure the right-hand side of the backsplash to the lathe.
Mount Mill/Drill
Eyeshield
To mount the mill/drill eyeshield:
1.Attach the eyeshield to the mill/drill with the knurled knob as shown in Figure 9. Note— the eyeshield provides the best coverage when it is positioned down as far as it can go.
Figure 9. Attaching eyeshield to the
mill/drill head.
|
|
|
|
|
|
|
|
|
|
|
|
G0516 Lathe/Mill |