INTRODUCTION

Manual Accuracy

We are proud to offer this manual with your new machine! We've made every effort to be exact with the instructions, specifications, drawings, and photographs of the machine we used when writing this manual. However, sometimes we still make an occasional mistake.

Also, owing to our policy of continuous improve- ment, your machine may not exactly match the manual. If you find this to be the case, and the dif- ference between the manual and machine leaves you in doubt, check our website for the latest manual update or call technical support for help.

Before calling, find the manufacture date of your machine by looking at the date stamped into the machine ID label (see below). This will help us determine if the manual version you received matches the manufacture date of your machine.

Manufacture Date

of Your Machine

For your convenience, we post all available man- uals and manual updates for free on our website at www.grizzly.com. Any updates to your model of machine will be reflected in these documents as soon as they are complete.

-2-

Contact Info

We stand behind our machines. If you have any service questions, parts requests or general ques- tions about the machine, please call or write us at the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

E-Mail: techsupport@grizzly.com

We want your feedback on this manual. If you can take the time, please email or write to us at the address below and tell us how we did:

Grizzly Industrial, Inc.

C/O Technical Documentation Manager

P.O. Box 2069

Bellingham, WA 98227-2069

Email: manuals@grizzly.com

Machine Description

The Model G0700 is designed as an alternative option to a traditional cabinet saw. This saw is capable of both through and non-through cutting operations, similar to a traditional cabinet saw, but has a sliding table available to assist with cross- cuts or angled cuts that would otherwise require a jig or crosscut sled to cut safely.

A scoring blade is included with the Model G0700. It may or may not be used, depending on if the workpiece is faced with laminate, melamine, or other solid surface material, or if tear-out free cuts are required. If the scoring blade is not needed for cutting operations, it can be lowered under the table so it will stay sharp for later operations.

In order to produce accurate results, the slid- ing table must move parallel to the blade and the scoring blade must be aligned with the main blade.

Model G0700 (Mfg. since 8/09)

Page 4
Image 4
Grizzly G0700 owner manual Introduction, Manual Accuracy, Contact Info, Machine Description