SECTION 9: OPERATIONS
Control Panel
It is vital that you become familiar with the control panel before operating the Model G4015Z.
Power to the motor is controlled through a series of switches mounted on the Lower Belt Guard. Figure 37 shows the various buttons and light. Please examine the layout and note the list of functions to the right before running the lathe/mill.
1
2
3
4
5
Figure 37. Control panel components.
1.Power indicator light – shines when power is turned on using the system reset switch.
2.Motor off button – turns motor off.
3.Motor on button – turns motor on.
4.Reversing switch – selects direction of rota- tion for spindles. Lift the cover to access the switch. Pushing the button on the left hand side allows the motor to operate in the for- ward direction. Push the button on the right hand side and the motor reverses.
5.System reset – disconnects power from sys- tem. Rotate the button and allow to pop out. In the event of an emergency, the button can be depressed and all power to the motor will be turned off.
G4015Z Lathe/Mill |
