Grizzly G4015Z owner manual Unpacking, Piece Inventory

Unpacking

This combination lathe/mill is shipped from the manufacturer in a carefully packed crate. If you discover the machine is damaged after you’ve signed for delivery, and the truck and driver are gone, you will need to file a freight claim with the carrier. Save the containers and all packing mate- rials for possible inspection by the carrier or its agent. Without the packing materials, filing a freight claim can be difficult. If you need assis- tance determining whether you need to file a freight claim, or with the procedure to file one, please contact our Customer Service.

Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.

When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.

Piece Inventory

The Model G4015Z is, for the most part, pre- assembled at the factory. Inside the crate you’ll find:

•The Model G4015Z Combination Lathe/Mill

•6 mm Allen® Wrench

•5 mm Allen® Wrench

•4 mm Allen® Wrench

•3 mm Allen® Wrench

•Open End Wrench

•24T Gear

•25T Gear

•27T Gears

•30T Gear

•33T Gear

•36T Gear

•42T Gear

•48T Gear

•60T Gear

•72T Gear

•120T Gear

•125/127T Combination Gear

•120/60T Combination Gear

•Lathe Chuck Key

•Drill Chuck (Installed)

•Drill Chuck Arbor (Installed)

•Drill Chuck Key

•3 Outside Jaws

•(2) MT #3 Centers

•Knock Out Wedge

•Handle

•Hand Crank

In the event that any non-proprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or, for the sake of expedi- ency, replacements can be obtained at your local hardware store.

-8- G4015Z Lathe/Mill