![](/images/new-backgrounds/1213888/21388887x1.webp)
MACHINE DATA
SHEET
Customer Service #: (570)
GRIZZLY MODEL G4015Z COMBO LATHE/MILL
Overall Dimensions: |
|
|
Overall Length | 42" | |
Overall Width | 23" | |
Overall Height | 35" | |
Bed Width | 51⁄2" | |
Spindle Bore | 3⁄4" | |
Lathe, Drill Press and Tailstock Tapers | ..............................................#3 Morse Taper | |
Weight (Net) | 440 lbs. | |
Weight (Shipping) | 500 lbs. | |
Crate Size | 40" L x 23" W x 39" H | |
Footprint | 42" x 23" | |
Lathe Capacity: |
|
|
Swing Over Bed | 161⁄2" | |
Swing Over Saddle | 111⁄2" | |
Distance Between Centers | 19.2'' | |
Spindle | Intrinsic 4" Back Plate | |
Compound Travel | 3'' | |
Cross Slide Travel | 41⁄2" | |
Tailstock Barrel Travel | 11⁄2" | |
Spindle Speeds | 185, 330, 405, 535, 680, 955, 1455 R.P.M. | |
Feed Rate Range | 8 @ .002" | |
Thread Range Inch | ||
Thread Range Metric | 18 @ .2 - 3.0 mm | |
Lead Screw | ||
Cross Slide Screw | ||
Drill Press Capacity: (Measured without Drill Chuck) | ||
Swing | 12'' | |
Spindle to Bed | 153⁄4" | |
Spindle Travel | 31⁄2" | |
Spindle to Work Table | 10" | |
Spindle to Center line | 93⁄4" | |
Head Stock Height Adjustment | 3" | |
Range of Speeds | 117, 150, 220, 276, 290, 345, 360, 440, 450, 575, | |
.......................................................................................................... | 640, 836, 1000, 1300 R.P.M. | |
Number of Speeds | 14 | |
Drill Capacity | 7⁄8" | |
Motor: |
|
|
Type | TEFC Capacitor Start Induction | |
Horsepower | 3⁄4 | |
Switch | Push Button, Reversing | |
Phase | Single Phase | |
Voltage | 110V | |
Amps | 8.7 | |
R.P.M | 1710 | |
Bearings | Shielded And Lubricated For Life | |
Features: |
|
|
.............................................................................................................. | 4" | |
................................................................................................ | Tee Slots in Cross Slide |
..........................................................................................................19 Change Gears
....................................................................................................Drill Chuck with Arbor
............................................................................................................2 Dead Centers
Specifications, while deemed accurate, are not guaranteed.
G4015 Lathe/Mill |