Grizzly G4015Z owner manual Flats on bushing align with slot

gear support arm and loosely fasten the assembly to the tee-nut using the cap screw. Figure 41 shows the proper sequence. Slide the combination gear along the slot in the support arm until gear C meshes with gear D, as in Figure 42, and tighten the cap screw.

8.Rotate the support arm until gears B and A are in mesh. Tighten the cap screw at the bottom of the gear support arm. Figure 43 shows the gears properly aligned and in mesh.

Bushing

Tee-Nut

Slot

Gear

Support Arm

Combination

Gear

Figure 41. Flats on bushing align with slot.

Figure 42. Cut-away shows Gear C and D in mesh.

Figure 43. Gears aligned and in mesh.

G4015 Lathe/Mill -35-