INSTALLATION
ROTATING 45O ELBOW FOR STRAIGHT HORIZONTAL TERMINATIONS
1)Removeall4screwsthatsecure the elbow to the unit using a 1/4" magnetic nut driver.
2)Rotate the elbow 180o
3)Secure the elbow by securing it with the 4 screws.
Remove all 4 screws
and washers
| VENTING ARRANGEMENTS |
Horizontal Terminations for All | Vertical Terminations Systems for |
Venting Systems | Residential Manufactured and Mobile Homes |
The shaded areas in the diagram below show all allowable combinations of vertical runs with horizontal terminations. Maximum one 90O elbow (two 45o elbows equal one 90o elbow).
The shaded area in the diagram below shows all allowable combinations of straight vertical and offset to vertical runs with vertical terminations. Maximum two 45o elbows.
If the vent is ENCLOSED in a chase (min. size 9" x 9") maintain a
May be installed in Manufactured (Mobile) Homes after fi rst sale.
Propane and Natural Gas:
Residential, Manufactured andOffset to Vertical Terminations Mobile Homes Installations
The venting arrangements diagrammed below, have a min. of 75% (fl ue loss) efficiency with Fan Off, as required for manufactured homes. (Actual efficiency may be as high as 85%)
May be installed in Manufactured (Mobile)
Homes after fi rst sale.
NOTE: See "Vent Restrictor Position" section for installation instructions for the Vent Restrictor Position.
Hampton® H35 Direct Vent Freestanding Gas Stove | 13 |