Customizable button function list
The USER,
The USER button has no function until specifically assigned one (default is ‘None’).
The
The following is a description of the functions that these buttons can be assigned / reassigned to.
None
The user button has no function.
Standby
Sets the camera in standby mode to save battery consumption.
Stop down
Stops the lens down.
Flash Measure
Initiates flash measure function.
Interval timer
Initiates interval timer function.
Multi exposure
Initiates multi exposure function.
Self timer
Initiates self timer function.
Bracketing
Initiates bracketing function.
AF Drive
Activates the AF system in any focusing mode. When the button is pressed the AF system sets the correct focusing point automatically. This is a rapid, accurate and handy way of using the AF system when the camera is set to Manual focus mode. In this manner you take advantage of the accuracy and certainty of the autofocus system while retaining the control inherent in manual focusing mode.
Mirror up
Controls the mirror up or down function (same function as the
B mode
Sets the camera to B exposure mode.
T mode
Sets the camera to T exposure mode.
Cycle LM mode
Changes the
plus the following that are only available when a digital back is attached:
Histogram
Recalls the last shown histogram. (Not supported by all digital backs).
Grey balance exp.
Initiates a grey balance exposure. (Not supported by all digital backs).
Delete last image
Activate the delete function for the last image in a digital back. (Not supported by all digital backs).
Dig. foc check
Displays last exposure taken at 100% scale on digital backs with LCD. (Not supported by all digital backs).
A quick way to program the customizable buttons (and to access the Custom Option level in general) is to use the
1)Press the MENU button.
2)Then press the USER button.
This directly accesses the “Custom options” level in the menu and the “User button function” item.
68
