Imprint / Text
12
� ����
34
����� | � |
| |
����� |
|
56
�����
�����
1
AF
����Sel.
4.2.2Text
In Text you can compose your own combination of letters, words, sym- bols, etc for film edge information. The same procedure is also used to change a Profile name.
Text setting / Profile name changing
1)Press the MENU button on the grip.
2)Turn the front control wheel until Settings appears.
3)Press the Enter (DRIVE) button on the grip.
4)Turn the front control wheel to access 4.2 Image info.
5)Press the Enter (DRIVE) button to 4.2.2 Text.
6)On the left side of the screen there is a small box frame con- taining an X symbol and two arrow symbols. By turning the front control wheel, the selector cursor will enter the box and by turning the rear control wheel the selector cursor will move up and down.
•When the X in the box is highlighted and the Sel.(AF) button is pressed, the character highlighted in the text line lower down the screen will be deleted.
•When an arrow in the box is highlighted, the text line cursor moves along the text line in the arrow’s direction, moving past every character with every click on the Sel.(AF) button to the desired position. The highlighted character in the text line can then be replaced by a new character chosen by moving the selector cursor out of the box, positioning it over the new char- acter to highlight it, and then pressing the Sel.(AF) button.
•By turning the front control wheel, the cursor moves horizontally.
•By turning the rear control wheel, the cursor moves verti- cally and introduces all available characters by scrolling the screen.
So, to write and store the characters, proceed as follows:
1)You can firstly clear an unwanted line of text by highlighting the X symbol in the box and repeatedly pressing the Sel.(AF) button.
70
