Heatiator Rave4013i-c owner manual Framing and Clearances, A. Selecting Appliance Location

5 Framing and Clearances

A. Selecting Appliance Location

When selecting a location for the appliance it is important to consider the required clearances to walls (see Figure 5.1).

WARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access.

Due to high temperatures, the appliance should be locat- ed out of traffic and away from furniture and draperies.

NOTICE: Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONLY. Illustrations/diagrams are not drawn to scale. Actual installation may vary due to individual design preference.

It is important to follow the framing and finishing instructions step by step to ensure proper placement of fireplace in the surrounding framing/finishing materials.

Unlike many traditional, single sided Heatilator fireplaces, the RAVE4013I-C is recessed into surround framing. The left and right nailing tabs were designed to ensure the fireplace is recessed to the correct location within the framing materials. Refer to Section 13 for detailed instructions on finishing.

A

A

E

1 IN.

B

C TOP VENT

ONE 900 ELBOW

D*

ALCOVE

INSTALLATION

TOP VENT

ONE 90° ELBOW

B

F

	A	B	C	D	E	F
Inches	53-1/32	48	75	See Section D.	19-9/32	17-3/4
Millimeters	1347	1218	1905	Figure 5.5 & 5.6	490	451

Figure 5.1 Appliance Locations

Heatilator • RAVE4013I-C • 2293-900 Rev. C • 8/12 17