Heatiator Rave4013i-c 15-1/2IN 394 mm, 7 IN 178 mm, 12IN 305mm, SLP90, SL-2DVP, Dvp-Fbht

Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm to 184 mm) thick. If wall thickness is less than 4 in. (102 mm) the existing heat shields must be field trimmed. If wall thickness is greater than 7-1/4 in. (184 mm) a DVP-HSM-B will be required.

8 in. (203 mm)

Heat

Shield

15-1/8 in.

(384 mm)

	Max
12 in.	Effective
(305 mm)	Length

SLP-TRAP

Horizontal Termination Cap

Term Cap	Minimum	Maximum
	Effective Length	Effective Length
Trap1	3-1/8 in.	4-3/4 in.
	79 mm	121 mm
Trap2	5-1/4 in.	9-1/4 in.
	133 mm	235 mm

8-1/8 in.

(206 mm)

15 in.

(381 mm)

13in.

(330 mm)

Effective Length 5-3/4 to 8-3/8 in. 146 to 213 mm

5-1/2 in.	8-3/8 in.
140 mm	213 mm

87° 3°

10-1/2 in.

267 mm

10-7/8 in. 276 mm

CAUTION: THE SLP-HRC-SS AND SLP-HRC-ZC-SS TERMINATION CAPS ARE NOT APPROVED FOR USE WITH PROPANE (LP) FUEL. May lead to ele- vated glass temperature that may cause tempered glass breakage.

SLP-HRC-SS

SLP-HRC-ZC-SS

HORIZONTAL TERMINATION CAP

15-1/2 IN.

394 mm

7 IN.

178 mm

12IN.

305mm

	SLP90	SL-2DVP	DVP-FBHT	DVP-FBHT
	Figure 16.4 SLP Series Vent Components
64			Heatilator • RAVE4013I-C • 2293-900 Rev. C • 8/12