Heatiator Rave4013i-c Non-CombustibleFinish Materials, Inches to 4 Inches Thick Inside Fit Method

Non-Combustible Finish Materials

0 Inches to 4 Inches Thick Inside Fit Method

The Deco and Illusion decorative fronts are approved for inside fit applications. Non-combustible finishing materi- als up to 4 inches thick can be installed around the front (left, right, top, and bottom).

For inside fit applications, the decorative front must be in- stalled tight to the finishing flanges and must not overlap any finish material.

The Deco front requires a 1/2 inch clearance between the outer edge of the decorative front and inside edge of the surrounding finish materials. HHT recommends that the front be temporarily installed as a template, traced to ensure the finishing materials will fit properly, and then removed.

Reference dimensions for the Deco and Illusion fronts installed on the appliance are shown in Figure 13.13 and Figure 13.14.

FACTORY-INSTALLED

NON-COMBUSTIBLE

BOARD

0 - 4 IN.

3/4 IN.

20-1/2 IN. APPLIANCE

OPENING (HEIGHT)

3 IN.

0 - 4 IN.

DRYWALL OR

EQUIVALENT

(1/2 IN.)

Figure 13.10 Inside Fit Method (Deco Decorative Front Only)

Heatilator • RAVE4013I-C • 2293-900 Rev. C • 8/12 55