Hitachi Koki USA DDC 52N, DDC 62N manual Conditions for Combined Functions

7-9

3. Function Combination Matrix

Conditions for Combined Functions

❍: The combination is possible.

●: Either of the functions which is set first takes precedence. ✕ : Either of the functions which is set last takes precedence.

: One of the functions must be canceled before a copy cycle can be initiated.

▲ : The combination is disabled in 1 ▼ 2 Mode and the function set first takes precedence.

A : The combination is impossible if the Paper Size is input by custom size and the function set first takes precedence.

B : The combination is only available for the extra copies.

When OHP Interleaving is selected, 2 ▼ 2[2-in-1] or 2	▼ 2[4-in-1] Mode will be automatically
changed to 1 ▼ 1[2-in-1] or 1 ▼ 1 [4-in-1] Mode.

C: The combination can make OHP copies.

D: Shift-for-Margin and Half-Fold cannot be combined. (The function set first takes precedence.)

E: The Mixed Original Detection mode is valid regardless of whether Mixed Orig. Detect is turned ON or OFF.

F: The Mixed Original Detection mode is valid for Auto Detect and not valid for Size Input regardless of whether Mixed Orig. Detect is turned ON or OFF.

G: Booklet Creation and Back Cover cannot be combined. (Booklet Creation takes precedence.)

H: The zoom ration is automatically changed to Full Size.

I: No zoom ratios can be stored in memory in the Interrupt mode.

J: The function set last takes precedence. (Center Staple is automatically selected.)

K: Auto Size is automatically selected.

L: 2-Point Side Staple is automatically selected.

M: The functions cannot be combined only for Separation. (The function set first takes precedence.)

N: When the copier is equipped with an FN-3, the function set last takes precedence (and Center Staple

is automatically selected).

P: The combination is not possible only if Auto Paper is used, and Staple is automatically canceled. (The combination becomes possible when it is further combined with Z-Fold.)

Q: The combination is not possible only if Auto Paper is used with an FN-3 installed, and Staple is automatically canceled. (The combination becomes possible when it is further combined with Z- Fold.)

R: The combination is not possible only if the finished size of Z-Fold differs from the size of the cover

or interleaf. The function set first takes precedence. (Neither the cover nor interleaf can be folded in
Z-fold.)	7
- : Has no bearing
	Chapter

Miscellaneous