2. Placing the Original
Making Copies from a Book Using Book Copy Mode
<“Book” refers to an open bound original>
1 | Place the open book so that its top edge is at |
| the rear of the copier and the center of the |
book is aligned with the Book Marker indicated on the Original Length Scale.
NOTES
•Be sure to raise the document handler 15° or more before placing the original. If the document handler is raised to an angle less than 15°, the copier may fail to select the correct copy paper size or zoom ratio.
|
| 15° |
|
| 1155O027AA |
Original Length Scale | Book Maker | 1155O028AA |
| ||
|
|
• Do not place an original weighing more than 3kg on the Original Glass.
• When placing an open book, do not press the book hard on the Original Glass, as trouble could result.
1155O697AA
2 Gently lower the Document Handler.
NOTES
•If the book is thick, make a copy with the document handler raised.
•Not positioning the open book properly will result in copies with pages in incorrect order.
•Do not look directly at the Original Glass surface as a strong beam of light is emitted.
Making Copies Chapter 3
