Using the Copier Properly
To ensure the optimum performance of the copier, follow the precautions listed below.
•Never place a heavy object on the copier.
•Never subject the copier to shocks.
•Never open any doors or turn the copier off while the copier is making copies.
•Never bring any magnetized object near the copier.
•Never use flammable sprays, liquids or gases near the copier.
•Never modify the copier, as a fire or electrical shock could result.
•Never remove any panel or cover which is secured. The copier contains high voltage components which can cause electrical shock.
•Never tamper with the laser mechanism in
•Never drop paper clips, staples or other small pieces of metal through the vents or other openings in the copier, as a fire or electrical shock can result.
•Never place containers of liquid on the copier. If liquids get inside the copier, they can cause fire or electrical shock. If a piece of metal or any liquid gets inside the copier, immediately turn the copier off, unplug the power cord and call your technical representative. A fire or electrical shock can result if the copier remains plugged in or is operated after metal or liquid gets inside.
•Never leave the copier running if it becomes unusually hot, or if smoke or an unusual odor or noise is detected. Should any of these conditions occur, immediately turn the copier off, unplug the power cord and call your technical representative. A fire or electrical shock can result if the copier remains plugged in under any of these conditions.
•Always insert the power plug all the way into the outlet.
•Always make sure that the outlet is visible, clear of the copier or copier cabinet.
•Always provide good ventilation when making a large number of continuous copies.
•Never pull on the power cord, and always hold the plug when unplugging the power cord. A damaged cord could result in a fire or cause an electrical shock.
•Never unplug the power cord with a wet hand, as it could cause an electrical shock.
•Always unplug the power cord before moving the copier. Moving the copier with the power cord plugged in can damage the cord resulting in a fire or causing an electrical shock.
•Always unplug the power cord when the copier is not going to be used for a long time.
•Never place a heavy object on the power cord, or pull or bend it, as a fire or electrical shock can result.
•Always ensure that the copier does not sit on or roll onto the power cord or communications cable of other electrical equipment, as malfunctioning equipment or a fire could result.
•Always ensure that the power cord or communications cable of other electrical equipment does not become wedged into the copier mechanism, as malfunctioning equipment or a fire could result.
•Always use the correct power voltage, as improper voltage can cause a fire or electrical shock.
