Hitachi Koki USA DDC 62N, DDC 52N Typical Function Combinations, Making Different Types of Copy

Making Copies Chapter 3

3-74

11. Typical Function Combinations

Making Different Types of Copy

These pages explain about how to combine different functions to make various types of copy.

Reading the Table

1	2	3	4	5	6	7	8
	Intended Type of	Loading the	Copy	Finishing	Margin	File	Select
	Copy	Originals		Functions		Margin	Position
			2
	over			Corner Staple
2	Turn
▼
1				Hole Punch
	over		2
				2-Point Staple
	Turn

1.Shows whether the copy is 1-sided or 2-sided.

2.Shows what type of copy you want to make.

3.Shows how to load your original. ☞ p. 3-4

4. Shows which to set, either 1, 2, 2in1, or 4in1 for Original ▼ Copy. ☞ p. 3-34

5.Shows which to set, either Corner Staple, 2-Point Staple, or Hole-Punch for the finishing function.

☞p. 3-20

6.Shows the margin position to be set for your original. ☞ p. 3-37

7.Shows the file margin function to be set as an auxiliary function. ☞ p. 3-54

8.Shows that the stapling position or hole punch positions must be set using the Select Position key.

☞p. 3-23, 3-24

* The marker “-“ in the table indicates that no key setting is necessary.