Hobart HR5 manual Loading Spits Into Oven, Loading Fork Spits Into Oven, PL-53379, PL-53378

Loading Spits Into Oven

1.Place the skewer into the small outside hole on the rotor end plate on your left (as you face the oven). The back of the V-shape spit should be pointing towards you (Fig.18).

V-SPIT

HR7

Fig. 18

PL-53379

2.Fit the other end on the spit into the small corresponding holes on the rotor end plate on your right (as you face the oven) (Fig.18).

3.Make sure the spit is level. If spit is not level make, sure you are using the correct holes on the rotor end plates.

Loading Fork Spits Into Oven

1.Place sharp end of spit into holes on the rotor end plate on your left (as you face the oven).

2.Fit the opposite end of spit into corresponding holes in the rotor end plate on your right (Fig. 19).

FORK SPIT

HR7

Fig. 19

PL-53378

– 28 –