Holder A4 VG 40 EP C 9700 ... C 9.88 H, Operating Instructions, General Remarks on Maintenance

Operating Instructions

General Remarks on Maintenance

C 9700 ... C 9.88 H

•Do not run engine in enclosed spaces! Danger of poisoning!

•To prevent the danger of fire, keep the tractor and implements clean!

•When leaving the tractor, secure it against rolling and unauthorized use (parking brake, chocks), stop the engine, remove the ignition key and, if required, lock the cabin.

•Do not leave the tractor unattended as long as the engine is still running.

•If external current consumers are connected, eg equip- ment with solenoid valves, protect them with diodes against back currents. If not, the traction electronics could be affected.

•Operate the equipment only if all guards are installed and in position.

•Install and remove the cardan shaft only with the engine stationary.

•When working with the PTO shaft, no-one should be standing in the area of the rotating PTO and cardan shaft.

•The guards for the cardan shaft and the PTO shaft must be installed as specified.

•When the cardan shaft is removed, refit the protective cap on the PTO shaft.

•Do not perform any welding, cutting and grinding work on carrying and other safety-relevant parts such as tractor frame, axles, trailer hitch, etc.

•The mounting of tires requires sufficient knowledge and special mounting tools.

•Only use genuine spare parts or qualitatively equiva- lent, commercially-available parts. Use the parts in the list of maintenance parts in the chapter entitled "Mainte- nance Data".

•Before taking into service and after servicing or repair, the tractor and the implement must be checked for road worthiness and operating safety.

152 145 052