Holder C 9700 H, VG 50 EP Operating the Emergency Start Hydrostatic Drive with Dual-Drive Only

C 9700 ... C 9.88 H

Operating Instructions

Special Operating Instructions

Operating the Emergency Start (Hydrostatic Drive with Dual-Drive Only)

NOTE

In case the engine was stalled and can not be started again, the emergency start must be operated before a renewed starting attempt.

- Fully depress the inch pedal.
- Briefly operate the starter.
- Pull the handle for the emergency start (1) up.
- Start the engine again.
Operating the Emergency Shift (Mechanical Gearbox	1
Only)
NOTE	1
In the event of a failure of the electrical
installation, it is possible to drive to an authorized
workshop with the emergency shift.

-Turn off the engine.

-Apply the parking brake

-Put the range selector lever and the gearshift lever in neutral

-Remove the wire safety (3).

-Carefully press the ball socket of the servo motor (2) down until it is disconnected.

-Move the operating lever (1) to the desired position. V = forwards or R = reverse.

-Start the engine and drive to the workshop.

R V

2

3 Bild_089

145 052 83