Holder C 9.78 H Special Operating Instructions, Stationary Operation, litres 5.8 USGAL, Danger

C 9700 ... C 9.88 H

Operating Instructions

Special Operating Instructions

Stationary Operation

The tractor can be used for stationary operation, for example, to drive a water pump via the PTO shaft.

ATTENTION

Place the tractor on level ground in both directions.

-Attach the stationary equipment to the PTO shaft (1).

-Set the gearshift lever (with a mechanical gearbox the gearshift and range selector lever) to the zero positi- on.

-With a hydrostatic drive, set the program switch to 0.

-Apply the parking brake.

DANGER

Before switching on the PTO, make sure no- one is standing in the vicinity of the tractor and the rotating PTO shaft.

1

Hydraulic Oil Flow for Stationary Operation

When the tractor is stationary, hydraulic oil is available, for example, for the operation of a hydraulic pump.

Max. oil quantity available 22 litres (5.8 USGAL.)

ATTENTION

Before starting to drive after stationary operation, first check the hydrostatic steering. Turn the steering wheel fully to the right and left several times to release air from the steering system.

145 052 81