Holder C 9700 H Engaging the Rear PTO, The rear PTO can be engaged with PTO, C 9700 ... C 9.88 H

C 9700 ... C 9.88 H

Operating Instructions

Operating the Implements

Engaging the Rear PTO 4

NOTE

The rear PTO can be engaged with PTO

selector lever (4) located at the articulated Ein

joint. The lever positions are shown on the plate (5).

-PTO selector lever (3) must be turned off.

-Move PTO selector lever (4) up to engage the rear

Aus

PTO.	5
DANGER
Before engaging the PTO, make sure no-one
is standing close enough to the tractor and			Bild_090
the driven implement to be hurt.	3
- Pull the PTO clutch lever (3) up quickly to the vertical
position. The rear PTO is engaged.
- To disengage it, return the PTO clutch lever to the
horizontal position.
- Push the PTO selector lever (4) down again.
DANGER
After the equipment is turned off, it can still
continue to run. Wait until the equipment is
stationary before working on it again.
		Bild_087

145 052 105