Holder C 9.72 H Maintenance Every 500 Service Hours, Changing the Engine Oil, litres 2.31 USGAL

C 9700 ... C 9.88 H

Operating Instructions

Maintenance Every 500 Service Hours

Changing the Engine Oil

-Run the engine warm to operating temperature.

-Set the heating control to high.

-Place the tractor on level ground and turn off the engine.

-Place a suitable oil pan underneath the engine.

CAUTION

Danger of scalding when draining hot engine oil.

-Unscrew the oil drain plug.

-Allow the oil to run out completely.

ATTENTION

Observe the instructions for handling fuels and lubricants.

-Screw the oil drain plug in again with a new seal and tighten to a torque of 55 Nm.

-Fill new engine oil at the filler neck (1). Only use recommended engine oil.

Filling quantity 8.75 litres (2.31 USGAL.)

-Let the engine idle shortly.

-After approx. 1 minute, check the oil level with the dipstick (2).

1

Bild_189

2

Bild_188

145 052 177