Holder C 9.72 The air in the hydraulic system is bled automatically, approx. 19 litres 5.02 USGAL

Operating Instructions

Maintenance Every 1500 Service Hours

C 9700 ... C 9.88 H

ATTENTION

Observe the instructions for handling fuels and lubricants.

Cleaning:

-Wash the sieve-star filter with clean Diesel fuel.

Replacement:

-Unscrew the sieve-star filter from the filter housing with a 24mm open-ended wrench.

-Fit a new toroidal sealing ring on the new filter and screw it on to the filter housing.

-Start the engine and make a slow trial drive with the tractor.

NOTE

The air in the hydraulic system is bled automatically.

-Shut off the engine.

-Check for leaks.

-Recheck the oil level with the oil dipstick (2) and top up hydraulic oil, if necessary .

The installation of the suction filter is carried out in the reverse	1
order of removal.

-Refit the oil drain plug (3) with new sealing ring, ensuring it is properly seated.

- Fill recommended hydraulic oil through the filler neck			2
		3
(1).
Filling quantity	approx. 19 litres (5.02 USGAL.)

-Check the oil level with the oil dipstick (2).

-Refit the filler neck cap.

Bild_138

192 145 052