Holder A4 VG 40 EP, VG 50 EP Operating the Implements, Additional Information for Implements

Operating Instructions

Operating the Implements

C 9700 ... C 9.88 H

Additional Information for Implements

When installing attachments on the front and rear 3-point lift, do not exceed the permissible total weight , the permissible axle loads and tire carrying capacities of the tractor.The front axle of the tractor must always be loaded with at least 20 % of the tractor's empty weight.

Before the purchase of equipment, make sure these conditions are met by performing the following calculations or by weighing the tractor- equipment combinations.

Determining the Total Weight, Axle Loads and Tire Carrying Capacity including the Minimum Ballasting

For the calculation you need the following data:

a(m) Distance between centre of gravity of front implement/front ballast and centre of front axle 2) 3)

b(m) Tractor wheelbase1) 3)

c(m) Distance between centre of rear axle and centre of lower link ball1) 3)

d(m) Distance between centre

lower link ball and centre of gravity of rear implement/rear ballast 2)

1)See operating manual, Technical Data

2)See price list and/or operating manual of the implement

3)Measure

T		(kg)	Empty weight of the tractor 1)
L		(kg)	Front axle load of the empty tractor 1)
T
V		(kg)	Rear axle load of the empty tractor 1)
T	H
GH (kg)			Total weight
			rear implement/rear ballast 2)
GV (kg)			Total weight
			Front implement/front ballast 2)

Gv		GH
	Tv	TH
a	b	c d

86 145 052