Holder C 9800 H Changing the Hydraulic Oil Pressure Filter Drive Hydraulics, C 9700 ... C 9.88 H

C 9700 ... C 9.88 H

Operating Instructions

Maintenance Every 500 Service Hours

Changing the Hydraulic Oil Pressure Filter (Drive

Hydraulics)

-Remove the air filter housing (1) with a 24mm wrench.

ATTENTION

Observe the instructions on handling fuels and lubricants.

-Clean the mating surface of the filter mount.

-Withdraw the pressure filter from the housing.

- Clean the housing.1

Bild_159

-Coat the new seal with oil.

-Insert the new pressure filter in the air filter housing.

-Screw the air filter housing with a new seal in the filter mount.

-Make a trial run and check for leaks.

-Check the hydraulic oil level.

145 052 179