GB

TRANSPORT

 

TRANSPORTING THE MOWER

 

WARNING :

Do not tilt the mower since this may cause fuel or oil spillage; spilt fuel or even fuel vapours are a fire hazard.

To transport the mower:

1.Place the throttle lever in “STOP” position.

2.Pull off the spark plug cap.

To facilitate the operation:

1. Remove the grass bag (see pages 29 and 67).

SAFETY

C10

2.Loosen the handle attachment knobs [1], pull out the adjustment stops [2] and fold the handle [3]. NOTE: After folding the handle, check that the cables are not kinked, twisted or stretched.

LOADING THE MOWER

CAUTION:

•To prevent losing control of or damaging the mower, do not use the drive system when going up or down a loading ramp.

•To prevent damaging the drive system, do not engage the clutch when the mower is rolling backwards.

•Transport the mower in normal horizontal position with its four wheels flat on the vehicle platform.

•We recommend that you use a loading ramp or that you get someone to help you load and unload the mower.

•Adjust the loading ramp so that it is inclined at an angle of less than 15°.

•When transporting the mower, immobilise it using straps and place chocks under the wheels.

•The straps must not touch the following parts of the mower: throttle lever, blade clutch lever, gas tank and all the control cables.

F

TRANSPORT

 

 

TRANSPORT DE LA TONDEUSE

 

 

 

 

 

 

 

Pour ne pas risquer de répandre de l’essence ou de l’huile, ne pas incliner la tondeuse ; de l’essence répandue ou encore des vapeurs d’essence risquent de prendre feu.

Pour transporter la tondeuse :

1.Mettre le levier de commande des gaz sur la position “ARRET”.

2.Enlever le capuchon de la bougie.

Pour plus de commodités :

SECURITE

C10

1.

Retirer le sac de ramassage (voir pages 29 et 67).

 

 

 

2.

Desserrer les molettes de serrage [1], déboîter les butées de réglage [2] et replier le guidon [3].

NOTE : Après avoir plié le guidon, vérifier si les câbles ne sont pas noués, tordus ou encore trop tendus.

CHARGEMENT DE LA TONDEUSE

PRÉCAUTION :

•Pour éviter tout risque de perte de contrôle ou d’endommagement de la tondeuse, ne pas utiliser le système de traction lorsqu’on fait monter ou descendre la tondeuse sur une rampe de chargement.

•Pour éviter d’endommager le système de traction, ne pas enclencher l’embrayage lorsque la tondeuse roule en marche arrière.

•Transporter la tondeuse en position horizontale normale, ses quatre roues étant à plat sur la plate-forme du véhicule.

•Il est recommandé d’avoir recours à une rampe de chargement ou de se faire aider par quelqu’un pour charger ou décharger la tondeuse.

•Régler la rampe de chargement de façon à ce que son angle d’inclinaison soit inférieur à 15°.

•Lorsqu’on transporte la tondeuse, l’immobiliser à l’aide de sangles et placer des cales sous les roues.

•Les sangles ne doivent pas toucher les parties suivantes de la tondeuse : le levier de commande des gaz, le levier de l’embrayage de lame, le réservoir d’essence, ainsi que l’ensemble des câbles de commande.

77

Page 76 Page 78
Page 77
Image 77
Honda Power Equipment HRB425C owner manual Transporting the Mower, Loading the Mower, Transport DE LA Tondeuse
Page 76 Page 78

HRB425C specifications

The Honda Power Equipment HRB425C is a robust and efficient lawn mower designed for homeowners and professional landscapers alike. Known for its reliability and innovative features, the HRB425C is engineered to provide exceptional performance in a variety of mowing conditions.

One of the standout features of the HRB425C is its powerful Honda GCV160 engine. This 4-stroke, air-cooled engine ensures reliable starting and efficient fuel consumption. With a maximum output of 5.5 horsepower, this mower delivers ample power to tackle even the toughest grass. Its advanced ignition system provides quick starts and smooth operation, reducing the hassle often associated with traditional mowers.

The HRB425C boasts a cutting width of 21 inches, making it suitable for both small and medium-sized lawns. The mower features a 3-in-1 cutting system, allowing users to choose between bagging, mulching, or side discharge. The mulching capability is particularly noteworthy, as it finely chops grass clippings and returns them to the soil, providing natural fertilizer and improving lawn health.

Operator comfort is a priority in the design of the HRB425C. The mower is equipped with an adjustable handlebar, which can be set to different heights to accommodate users of various sizes. The ergonomic design minimizes fatigue during extended mowing sessions, making it a favorite among professionals.

In terms of build quality, the HRB425C features a durable, steel deck that is designed to withstand wear and tear. Its robust construction ensures longevity, allowing users to get years of reliable service from this mower. Additionally, the mower's wheels are equipped with durable treads that maximize traction on uneven terrain, providing stability and control while mowing.

Another significant feature of the HRB425C is its quick-adjust cutting height. With a simple lever adjustment, users can select from multiple cutting heights, ranging from 3/4 inch to 4 inches, allowing for versatility in grass length and health.

Honda's commitment to innovation is evident in the HRB425C's low emissions technology. The engine meets stringent environmental standards, making it an eco-friendly choice for consumers. Moreover, the mower operates quietly, making it suitable for residential areas where noise reduction is a priority.

Overall, the Honda Power Equipment HRB425C combines power, efficiency, and user-friendly features, making it a top choice for maintaining excellent lawn care. Its blend of dependability and advanced technology ensures that it stands out in the crowded market of lawn mowers, providing a superior mowing experience for all users.
Top Page Image Contents