Navigation

3.Remove the disk from the mailslot.

You can now eject additional disks by pressing ENTER and then following step 1 through step 3 until you are finished ejecting the disks.

Note: When the last disk is ejected, EMPTY displays briefly before returning to EJECT *.

4. Press CANCEL to return to the READY state.

Entering the administration menu password

READY > ADMIN* > PSWD 000 000 000

A nine digit numeric password is required to access menu choices beneath the ADMIN* menu of the jukebox. The jukebox ships with a factory default password setting of 000 000 000.

Note: To change the administration menu password, see “Changing the administration menu password” on page 35.

To access administration menu options using the factory default password:

1.With READY displaying on the control panel, press NEXT until ADMIN* displays.

2.Press ENTER. PSWD 000 000 000 displays and the first set of three zeros flashes.

■If the default password 000 000 000 is still in effect, you can accept this password by pressing ENTER three times (once for each set of three zeros). TEST* displays, indicating that the password was accepted. You are now in the menu tree below ADMIN*.

■If you have already changed the password from the factory setting, then continue with the following steps.

3.Press NEXT or PREV until the first number of your password displays and then press ENTER. The middle set of three zeros flashes.

4.Press NEXT or PREV until the second number of your password displays and then press ENTER. The third set of three zeros flashes.