Navigation

5.Press NEXT or PREV until the third number of your password displays and then press ENTER. TEST * displays, indicating that the password was accepted. You are now in the menu tree below ADMIN*.

Changing the administration menu password

READY > ADMIN* > PSWD 000 000 000 >CONFIG*

To protect the system from unauthorized access, change the password from the factory default setting:

1.With READY displaying on the control panel, press NEXT until ADMIN* displays, then press ENTER and enter the password.

2.TEST * displays, indicating that the password was accepted. Press NEXT until CONFIG * displays and then press ENTER.

3.Press NEXT or PREV or until NEW PASSWORD displays and then press

ENTER.

4.NEW 000 000 000 displays and the first set of three zeros flashes. Press NEXT or PREV until the new number you want to assign to the first part of the password displays and then press ENTER. The second set of three zeros flashes.

5.Press NEXT or PREV until the new number you want to assign to the second part of the password displays and then press ENTER. The third set of three zeros flashes.

6.Press NEXT or PREV until the new number you want to assign to the third part of the password displays and then press ENTER.

7.PASSWORD CHANGED displays. Press CANCEL three times to return to

READY.

8.Power off the jukebox, then power it back on to save the password to the jukebox flash ROM.

Note: Be sure to document your new password. If you forget it, contact your service representative to reset the security code to the factory default.