Navigation
Table 7: Internal tests (Continued)
Test Name | Description |
FILL PICKER | Used by service personnel only. Do not run this test if the |
| jukebox contains disks with file system data on them. |
| Moves a disk into the disk transport mechanism from the first |
| storage slot containing a disk. This test must be run twice to |
| fill both containers in the disk transport mechanism. |
|
|
EXERCISE MECH | Runs the VERTICAL TEST, TRANSLATE TEST, FLIP |
| TEST, MAGAZINE IO, DRIVE IO, and MAILSLOT IO |
| tests. Each test runs one time per test loop. |
|
|
WELLNESS TEST | Checks the general capability of the jukebox. Requires one |
| loaded disk. The drives, transport, and mailslot must be |
| empty. Runs INIT MECHANICS and EXERCISE |
| MECHANICS. Each test runs one time per test loop. |
|
|
CLEAR SOFT LOG | Used by service personnel only. Sets the soft error log to |
| zero. |
|
|
CLEAR HARD LOG | Used by service personnel only. Sets the hard error log to |
| zero. |
|
|
PLUNGE FULL SPD | Allows the disk transport mechanics to run at full speed. This |
| setting should always be used in normal jukebox operation. |
|
|
PLUNGE 1/2 SPD | Used by service personnel only. |
| Allows the disk transport mechanics to run at half speed. |
|
|
PLUNGE 1/4 SPD | Used by service personnel only. |
| Allows the disk transport mechanics to run at quarter speed. |
|
|
MAILSLOT | Displays the current state of the mailslot sensors. If a sensor |
SENSORS | is not blocked, a “0” is displayed. If a sensor is blocked, an |
| “*” is displayed. The display automatically updates when the |
| status changes. |
|
|
STARWARS | The display shows 0 0 0. |
| Each “0" indicates one of the paths that the disk transport |
| mechanism follows in front of each stack of optical disks. If |
| the path is clear, a “0” displays; if the path is blocked |
| (because of an optical disk that is not inserted fully into its |
| storage slot for example), an “*” will be displayed. This |
| display is automatically updated if the status changes. |
|
|