Navigation

Table 6: Information logs (Continued)

 

Log name

Description

 

— *MICROMOVE 6

Sixth jukebox micro-move for the original move

 

#

command issued prior to the failure. (This is the

 

 

last to be logged.)

■

*MICROMOVE ER #

Micro-move error that occurred.

■

TOP or BOTTOM

Displays either TOP or BOTTOM indicating

 

PICKER

which side of the disk transport mechanism was

 

 

active at the time of the error.

■

NORTH or SOUTH

Displays either NORTH or SOUTH indicating

 

THUMB

which thumb on the transport mechanism was

 

 

active at the time of the error.

Running an internal test

READY > ADMIN* >TEST*

This section describes self-diagnostic tests that are available on the jukebox.

Caution: Diagnostic tests should be run only by an authorized service representative. Descriptions of the self-diagnostic tests are included in this manual for information purposes only. If not properly completed, some of the internal diagnostic tests can corrupt your file system. In some rare instances, your service representative may request that you run specific tests to provide information before they come to your site, or you may receive a control panel message to run a specific test.

1.With READY displaying on the control panel, press NEXT until ADMIN* displays.

2.Enter the administration password (see “Entering the administration menu password” on page 44).

3.TEST* displays. Press ENTER.

4.Press NEXT until the name of the test you want to run displays and then press ENTER to start the test.