
HP unidrivers
HP PCL 6, HP PCL 5e, and PS emulation unidriver features
NOTE For a comparison of features between the HP unidrivers and HP traditional print drivers in various operating systems, see the
When you install the
Windows Server 2003, the HP PCL 6 Unidriver is installed by default. The HP PCL 5e Unidriver and the PS Emulation Unidriver can be installed by performing a Custom Installation.
The following sections describe the options that are available on each tab of the HP PCL 6, PCL 5e, and the PS emulation unidriver interface.
The sections also describe differences among the HP PCL 6, PCL 5e, and the PS emulation unidrivers.
Access to print drivers
To gain access to driver settings from within most software programs, click File, click Print, and then click Properties. The appearance and names of the driver tabs can vary, depending on the operating system. These settings apply only while that software program is open.
You can also control the drivers directly from the Printers folder. These settings change the default settings that are used across all software programs. To gain access to the Printers folder, click Start, select Settings, and then click Printers (Windows 2000) or Printers and Faxes (Windows XP Professional and Windows Server 2003) or Printers and Other Hardware Devices (Windows XP Home).
NOTE If your printer has a minimum of 80 MB of memory, the Proof and Hold and Private Job
If, after
Help system
The HP PCL 6 Unidriver, the HP PCL 5e Unidriver, and the PS Emulation Unidriver include a full- featured Help system to provide assistance with printing and configuration options.
NOTE Bubble Help, a feature of HP traditional PCL 6and PCL 5e drivers, is not available in the HP PCL 6, PCL 5e, and PS emulation unidrivers.
168 | 4 HP PCL 6, HP PCL 5e, and HP PS 3 emulation unidrivers for Windows |