The following Last Page options are available:

Size is: drop-down menu

Source is: drop-down menu

Type is: drop-down menu

The Size is: setting specifies the media size to use for the entire print job. Changes that you make to

the Size is: setting here override any previous Size is: settings that you made in other Use Different Paper/Covers options.

The Type is: drop-down menu shows all of the media types that the product supports. For more

information about the Type is: drop-down menu settings, see the description for Type is: in the Type is section of this chapter.

NOTE You must use the same size of media for the entire print job. All Use Different Paper/ Covers options use the last Size is: setting that you select in any one of the Use Different Paper/Covers options.

When you change the type and source of the media and covers, the settings you select remain configured until you close the software program.

Back Cover

Use the Back Cover options to include a blank or preprinted back cover on a document, or to include a back cover from a source tray that is different from the one used for the remainder of the document.

The following illustration shows the Back Cover setting and options.

HP unidrivers

Figure 4-10 Back Cover setting

HP PCL 6, HP PCL 5e, and PS emulation unidriver features

189

Page 205
Image 205
HP 2410 manual Back Cover setting