HP 2410 manual HP PCL 6, HP PCL 5e, and PS emulation unidriver features 201

To print a multiple-page document, follow these steps:

1Select the Print on Both Sides (Manually) check box.

2Click OK. The even-number pages of the document print.

3When the control panel shows the MANUALLY FEED OUTPUT STACK message, insert the stack of media (on which the even-number pages have been printed) as indicated in the following figure.

Figure 4-15Print on Both Sides Instructions

When you have completed the steps that appear in the dialog box, the second half of the print job prints on the back side of the stack of media. The driver does not require the application to specifically support odd- and even-page printing, because the driver coordinates this function.

Flip Pages Up

The Flip Pages Up check box, enabled only when Print on Both Sides is selected, is used to specify the duplex-binding option. By default, the Flip Pages Up check box is not selected. The following table demonstrates the results of selecting this box, depending on the media orientation selected on the Finishing tab.

HP unidrivers

HP PCL 6, HP PCL 5e, and PS emulation unidriver features 201