HP 2410 manual Device Settings, Deleting a Job Storage print job

HP unidrivers

5Press the SELECT button.

6If a PIN number is assigned to the job, press the up and down buttons to select the first digit of the PIN, and then press the SELECT button. The number in the product control-panel display changes to an asterisk. Repeat this step for each of the remaining three digits of the PIN number.

If no PIN number is assigned to the job, continue with step 7.

7Press the up and down buttons to select the number of copies to print.

8Press the SELECT button to print the job.

Deleting a Job Storage print job

Sometimes it is necessary to delete a print job from the product hard disk. You can do this from the product control panel.

1Press the SELECT button (the one with the check mark) to open the menus. RETRIEVE JOB is highlighted.

2Press the SELECT button.

3Press the up and down buttons to scroll to your User Name, and then press the SELECT button.

4Press the up and down buttons to scroll to the Job Name, and then press the SELECT button.

5Press the up and down buttons to select DELETE.

6If a PIN number is assigned to the job, press the up and down buttons to select the first digit of the PIN, and then press the SELECT button. The number in the product control-panel display changes to an asterisk. Repeat this step for each of the remaining three digits of the PIN number.

If no PIN number is assigned to the job, continue with step 7.

7Press the SELECT button to delete the job.

The stored print job is deleted and the product returns to the READY state.

Properties tabs

The Properties tabs contain information about and options for configuring the product.

Device Settings

NOTE The Device Settings tab is in the Properties for the print driver. To gain access to the print driver Properties, click Start on the Window task bar, select Settings, and then click Printers (Windows 2000) or Printers and Faxes (Windows XP Professional and

Windows Server 2003) or Printers and Other Hardware Devices (Windows XP Home). Right-click the product name, and then click Properties.

Available options depend on the feature. The following illustration shows the Device Settings tab.

210 4 HP PCL 6, HP PCL 5e, and HP PS 3 emulation unidrivers for Windows